HONOR 30 test point ( BMH-AN10 ) Test point, COM1 Mode Remove FRP and Huawei ID and Flashing

 BMH-AN10

HiSilicon Kirin 985

To perform Reset FRP operation via Factory Mode do the next steps:

1. Make sure your device is fully charged;
2. Power OFF the phone;
3. Select proper model from the list;
4. Press "Reset FRP (Factory Mode)" button;
5. Attach Test point as shown on Test point image or use On/Off Factory Mode option;
6. Connect USB cable (battery must be plugged in);

- In case if yout phone stuck on logo or erecovery mode, then try to reflash it and perform Factory Data Reset via recovery.

Test Point

Use For Repair Huawei Phones Such Like FRP Remove Huawei Id Remove
And Huawei Flashing Etc, On Latest Phone We Must Need Use Test Point To Access Phone Security.

9008 Port, Auto Reboot To Recovery, Auto Recovery Mod, Board Firmware Flashing, Bypass, Cert Read, Rert Wite, COM1, Convert to Global, Dead Boot Repair, deload flashing, EDL Mod, fastboot flashing, fix Com1 mode, fix damaged devices, fix dead boot repair, fix nv data, fix prloader mod, frp bypass, hang on logo, huawei id, Huawei Latest Secuirty, lock remove, oeminfo, read nvram, reband chinese, recovery mod, remove network, restart on logo, simlock, testpoint, update upgrade mode.